Ground Screw manufacturer and factory
加载中...

Ground Screw

Ground screw pile is a new type of pile foundation material, which has incomparable superiority advantage compared with traditional ground pile. The patented design is screwed into the ground to replace the concrete independent foundation and strip foundation. The top of ground screw pile is connected with the load.  The construction is not restricted by geological condition, construction efficiency, does not damage the environment, and it has more advantages of environmental protection. It can still be constructed even under severe cold weather conditions, It can facilitate migration and recycling. solar ground screw pile is not only a single product, but also includes a complete set of implementation solutions such as construction qualification, rich construction experience and management of technicians to ensure maximum service life.

  • Material:

    Q235
  • Service life:

    25 years
  • Warranty:

    20 years
Inquiry now
Product Detail


Advantages

1.Hot-dip galvanized carbon steel Q235
2.The surface is hot-dip galvanized to ensure rust prevention and durability
3.Zinc coating thickness evaluation 80-100μm
4.The pile driver spins for about 30-75 seconds each
5.Service life 25 years
6.20 years warranty



Technical Parameter

Ground Screw manufacturer and factory

Thickness 3.1-4.0mm Ground Screw

Part No

Specificalion

Customized Design Service

Material

10-761230-C

T3*Φ76*1200mm

Provide the ground screw as per instaiiation geological

 condition following customers' required length diameter,

 thickness,thickness of thread , shape of flange and size.

Hot-dip Galvanized

Steel Q235

10-761630-C

T3*Φ76*1600mm

10-763030-C

T3*Φ76*3000mm


Ground Screw manufacturer and factory

Thickness 3.1-4.0mm Four Blade Spiral Pile

Part No

Specificalion

Customized Design Service

Material

10-761230-C

T3*Φ76*1200mm

Provide the ground screw as per instaiiation geological

 condition following customers' required length diameter, 

thickness,thickness of thread , shape of flange and size.

Hot-dip Galvanized

Steel Q235

10-761230-C

T3*Φ76*1600mm

10-761230-C

T3*Φ76*3000mm


Ground Screw manufacturer and factory

Thickness 3.1-4.0mm Adjustable Spiral Pile

Part No

Specificalion

Customized Design Service

Material

10-761230

T3*Φ76*1200mm

Provide the ground screw as per instaiiation geological

 condition following customers' required length diameter,

 thickness,thickness of thread , shape of flange and size.

Hot-dip Galvanized

Steel Q235

10-761630

T3*Φ76*1600mm

10-763030

T3*Φ76*3000mm


Thickness 3.1-4.0mm Ground Screw Without Thread

Part No

Specificalion

Customized Design Service

Material

10-W481230

T3*Φ48*1200mm

Provide the ground screw as per instaiiation geological 

condition following customers' required length diameter, 

thickness,thickness of thread , shape of flange and size.

Hot-dip Galvanized

Steel Q235

10-W481530

T3*Φ48*1500mm

10-W483030

T3*Φ48*3000mm


Ground Screw manufacturer and factory

Thickness 3.1-4.0mm  Ground Screw With Flange

Part No

Specificalion

Customized Design Service

Material

10-761230

T8*Φ76*1200mm

Provide the ground screw as per instaiiation geological 

condition following customers' required length diameter, 

thickness,thickness of thread , shape of flange and size.

Hot-dip Galvanized

Steel Q235

10-761630

T8*Φ76*1500mm

10-763030

T8*Φ76*3000mm


Ground Screw manufacturer and factory


Project case




A Free Consultation

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products
Hanger Bolt Kit
Hanger Bolt Kit

The Metal Roof Solar brackets is suitable for roofing with corrugated sheet metal, trapezoidal metal sheet. Hanger Bolt Kit is available for foot option, making the installation more convenience, competitive and reliable. The systems are fully comply with the Australian and other international standards on wind & snow load, making it suitable for a wide variety of climatic zones.

C-Profile Zn-Al-Mg Coated Steel Solar Mounting System
C-Profile Zn-Al-Mg Coated Steel Solar Mounting System

The main steel structure of Huge Energy's C-Profile Zn-Al-Mg coated steel solar mounting system is made of high-quality Zn-Al-Mg coated steel material. This ensures not only structural stability and aesthetic appeal but also provides exceptional self-repair capabilities and excellent corrosion resistance, resulting in a long service life. The solar mounting system utilizes an innovatively designed portable clamp that eliminates the need for flange holes on the upper and lower wings of the rail, enhancing the structure's bending resistance. It allows for flexible installation based on the size of the modules, significantly reducing installation time.

Floating Mounting System
Floating Mounting System

Floating mounting system is applied to solar PV power plant installation on water. Adopting HDPE material, it has passed the Hunt Water Absorption Test, Anti-Aging Test, Anti-UV Test, etc. Moreover, it can bear the pulling force that is much higher than other products. Adopting new module design in floater and main floater, it enables the array of double row in the same facing or in symmetrical facing and increases the efficiency of solar power generation and installation capacity. Moreover, it can be easily installed and saves the cost.

Tilted photovoltaic bracket system
Tilted photovoltaic bracket system

HUGE inclined photovoltaic bracket system is suitable for flat terrain and various uneven slopes, with strong wind and snow resistance. System stability, large-span design, minimal installation components, and low cost. Adjustable angles from east, west, north, and south, suitable for various inclined terrain. By using a pile driver to drive the foundation into the ground, construction is simple and installation efficiency is high.

Ballast PV System
Ballast Support for Flat Surface

Quick and easy assembly of the photovoltaic panels by means of snap-fitted universal clamps with channelled profile embedded in the ballast. Proprietary material formula: resistant to aging, moisture, heat, and corrosion at extrem weather, ensuring long-term durability. Versatility of each block for mounting the modules in both horizontal and vertical orientation.

Hot Dip Galvanized Steel Solar Mounting System
Hot Dip Galvanized Steel Solar Mounting System

Steel ground solar mounting system is a reliable and cost-effective solution for installing solar panels on the ground. It consists of sturdy steel structures that securely support the solar panels while withstanding extreme weather such as wind and snow. The piles are varied, allowing for customized installation on various types of terrain. With excellent durability and structural stability, steel ground mounting systems are widely used in both commercial and utility-scale solar projects.

Agrivoltaic Solar Mounting System
Agrivoltaic Solar Mounting System

Dual-use in land for both agriculture and energy production can improve land use efficiency and increase crop production by over 30%. And it can provide an additional source of income for farmers, making it a financially attractive option.

Building-Integrated Photovoltaics (BIPV) System
Building-Integrated Photovoltaics (BIPV) System

Building-integrated photovoltaic (BIPV) systems have dual-purposes: They serve as both the outer layer of a structure and electricity generation for off-grid or on-grid. BIPV systems save construction material costs and electricity costs, reduce pollution.

Leave a message

Leave a message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About Us

contact

top