Ground Screw manufacturer and factory
加载中...

Ground Screw

Ground screw pile is a new type of pile foundation material, which has incomparable superiority advantage compared with traditional ground pile. The patented design is screwed into the ground to replace the concrete independent foundation and strip foundation. The top of ground screw pile is connected with the load.  The construction is not restricted by geological condition, construction efficiency, does not damage the environment, and it has more advantages of environmental protection. It can still be constructed even under severe cold weather conditions, It can facilitate migration and recycling. solar ground screw pile is not only a single product, but also includes a complete set of implementation solutions such as construction qualification, rich construction experience and management of technicians to ensure maximum service life.

  • Material:

    Q235
  • Service life:

    25 years
  • Warranty:

    20 years
Inquiry now
Product Detail


Advantages

1.Hot-dip galvanized carbon steel Q235
2.The surface is hot-dip galvanized to ensure rust prevention and durability
3.Zinc coating thickness evaluation 80-100μm
4.The pile driver spins for about 30-75 seconds each
5.Service life 25 years
6.20 years warranty



Technical Parameter

Ground Screw manufacturer and factory

Thickness 3.1-4.0mm Ground Screw

Part No

Specificalion

Customized Design Service

Material

10-761230-C

T3*Φ76*1200mm

Provide the ground screw as per instaiiation geological

 condition following customers' required length diameter,

 thickness,thickness of thread , shape of flange and size.

Hot-dip Galvanized

Steel Q235

10-761630-C

T3*Φ76*1600mm

10-763030-C

T3*Φ76*3000mm


Ground Screw manufacturer and factory

Thickness 3.1-4.0mm Four Blade Spiral Pile

Part No

Specificalion

Customized Design Service

Material

10-761230-C

T3*Φ76*1200mm

Provide the ground screw as per instaiiation geological

 condition following customers' required length diameter, 

thickness,thickness of thread , shape of flange and size.

Hot-dip Galvanized

Steel Q235

10-761230-C

T3*Φ76*1600mm

10-761230-C

T3*Φ76*3000mm


Ground Screw manufacturer and factory

Thickness 3.1-4.0mm Adjustable Spiral Pile

Part No

Specificalion

Customized Design Service

Material

10-761230

T3*Φ76*1200mm

Provide the ground screw as per instaiiation geological

 condition following customers' required length diameter,

 thickness,thickness of thread , shape of flange and size.

Hot-dip Galvanized

Steel Q235

10-761630

T3*Φ76*1600mm

10-763030

T3*Φ76*3000mm


Thickness 3.1-4.0mm Ground Screw Without Thread

Part No

Specificalion

Customized Design Service

Material

10-W481230

T3*Φ48*1200mm

Provide the ground screw as per instaiiation geological 

condition following customers' required length diameter, 

thickness,thickness of thread , shape of flange and size.

Hot-dip Galvanized

Steel Q235

10-W481530

T3*Φ48*1500mm

10-W483030

T3*Φ48*3000mm


Ground Screw manufacturer and factory

Thickness 3.1-4.0mm  Ground Screw With Flange

Part No

Specificalion

Customized Design Service

Material

10-761230

T8*Φ76*1200mm

Provide the ground screw as per instaiiation geological 

condition following customers' required length diameter, 

thickness,thickness of thread , shape of flange and size.

Hot-dip Galvanized

Steel Q235

10-761630

T8*Φ76*1500mm

10-763030

T8*Φ76*3000mm


Ground Screw manufacturer and factory


Project case




A Free Consultation

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products
Pole Ground Solar Mounting System
Pole Ground Solar Mounting System

The Pole Ground Solar Mounting System, featuring a Basic Span Single Ramming Pile Type design, is a largely pre-assembled ground mounting solution. It is aptly suited for the deployment of large commercial and utility-scale solar photovoltaic projects. Fabricated from superior-grade aluminum, this solar mounting system boasts impressive resistance to corrosion. Its patented single-pile structural design not only reduces installation time and expense, with good compatibility to varied solar modules.

TiltUp Vento System
TiltUp Vento System

Triangular mounting brackets can easily apply to different flat roofs or open terrains since it has variable tilt angle and footing options for both roof clamp and roof penetration. Elevation can be used as fixed tilt or adjustable tilt, allowing project-specific adjustments and optimizing solar power output. The innovative high pre-assembly design eliminates on-site cutting and welding and enables quick and easy PV module installation.

Ballast PV System
HDPE Water Ballast

All-round solution for flat roofs and floors Integrated design: great help to quick and easy installation amd reduce costs for installation, operation and maintenance. Proprietary material formula: resistant to aging, moisture, heat, and corrosion at extrem weather, ensuring long-term durability. Material testing: undergoes rigorous weather resistance testing, guaranteeing 25-year service life and 15-year product warranty. Reinforced structural design: enhanced connector design ensures strong wind resistance to provide added stability. Special Precaution: serve as a backup water source for fire extinguishing as an additional safety measure in case of fire.

C-Profile Zn-Al-Mg Coated Steel Solar Mounting System
C-Profile Zn-Al-Mg Coated Steel Solar Mounting System

The main steel structure of Huge Energy's C-Profile Zn-Al-Mg coated steel solar mounting system is made of high-quality Zn-Al-Mg coated steel material. This ensures not only structural stability and aesthetic appeal but also provides exceptional self-repair capabilities and excellent corrosion resistance, resulting in a long service life. The solar mounting system utilizes an innovatively designed portable clamp that eliminates the need for flange holes on the upper and lower wings of the rail, enhancing the structure's bending resistance. It allows for flexible installation based on the size of the modules, significantly reducing installation time.

Floating Mounting System
Floating Mounting System

Floating mounting system is applied to solar PV power plant installation on water. Adopting HDPE material, it has passed the Hunt Water Absorption Test, Anti-Aging Test, Anti-UV Test, etc. Moreover, it can bear the pulling force that is much higher than other products. Adopting new module design in floater and main floater, it enables the array of double row in the same facing or in symmetrical facing and increases the efficiency of solar power generation and installation capacity. Moreover, it can be easily installed and saves the cost.

Adjust Ground Solar Panel Structure manufacturer
Adjust Ground Solar Panel Structure

The Adjust Ground Solar Panel Structure is designed for increasing power generation by angle settings according to season changing. It can achieve different angle cover N-S 10'-60 through manual or with electric motor. Carbon steel is adopted as the main material for structure to ensure the whole stability.

Tilted photovoltaic bracket system
Tilted photovoltaic bracket system

HUGE inclined photovoltaic bracket system is suitable for flat terrain and various uneven slopes, with strong wind and snow resistance. System stability, large-span design, minimal installation components, and low cost. Adjustable angles from east, west, north, and south, suitable for various inclined terrain. By using a pile driver to drive the foundation into the ground, construction is simple and installation efficiency is high.

Ballast PV System
Ballast PV System-2

Ballast PV System are applied to various kinds of flat roof projects. Main components made of hot-dip galvanized steel have good performance of structure strength, stability and anti-corrosion, and are compatible with varied solar modules. Patented structure design guarantees shorter installation time to save construction cost.

Leave a message

Leave a message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About Us

contact

top